dmesg - Test 1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-24-generic (buildd@batsu) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 (Ubuntu 3.13.0-24.47-generic 3.13.9)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bea51fff] usable
BIOS-e820: [mem 0x00000000bea52000-0x00000000bec29fff] reserved
BIOS-e820: [mem 0x00000000bec2a000-0x00000000bec33fff] ACPI data
BIOS-e820: [mem 0x00000000bec34000-0x00000000bf021fff] ACPI NVS
BIOS-e820: [mem 0x00000000bf022000-0x00000000bf15bfff] reserved
BIOS-e820: [mem 0x00000000bf15c000-0x00000000bf15cfff] usable
BIOS-e820: [mem 0x00000000bf15d000-0x00000000bf362fff] ACPI NVS
BIOS-e820: [mem 0x00000000bf363000-0x00000000bf7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./990FXA-UD3, BIOS F2 07/15/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CEFFF write-protect
CF000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BF800000 mask FFFFFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000023f000000 aka 9200M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
total RAM covered: 3064M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd820-0x000fd82f] mapped at [ffff8800000fd820]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdd000, 0x01fddfff] PGTABLE
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
init_memory_mapping: [mem 0x23ee00000-0x23effffff]
[mem 0x23ee00000-0x23effffff] page 2M
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0x23c000000-0x23edfffff]
[mem 0x23c000000-0x23edfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x23bffffff]
[mem 0x200000000-0x23bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbea51fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xbe9fffff] page 2M
[mem 0xbea00000-0xbea51fff] page 4k
init_memory_mapping: [mem 0xbf15c000-0xbf15cfff]
[mem 0xbf15c000-0xbf15cfff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0xbf363000-0xbf7fffff]
[mem 0xbf363000-0xbf3fffff] page 4k
[mem 0xbf400000-0xbf7fffff] page 2M
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0x100001000-0x1ffffffff]
[mem 0x100001000-0x1001fffff] page 4k
[mem 0x100200000-0x13fffffff] page 2M
[mem 0x140000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x349f8000-0x364f3fff]
ACPI: RSDP 00000000000f0490 000024 (v02 ALASKA)
ACPI: XSDT 00000000bec2c068 000054 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000bec31d18 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131115/tbfadt-603)
ACPI: DSDT 00000000bec2c150 005BC1 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000bf01cf80 000040
ACPI: APIC 00000000bec31e10 00008E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000bec31ea0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000bec31ee8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 00000000bec31f28 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 00000000bec31f60 001158 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023effffff]
Initmem setup node 0 [mem 0x00000000-0x23effffff]
NODE_DATA [mem 0x23eff7000-0x23effbfff]
[ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236600000-ffff88023e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x23effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xbea51fff]
node 0: [mem 0xbf15c000-0xbf15cfff]
node 0: [mem 0xbf363000-0xbf7fffff]
node 0: [mem 0x100001000-0x23effffff]
On node 0 totalpages: 2088588
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 12156 pages used for memmap
DMA32 zone: 777968 pages, LIFO batch:31
Normal zone: 20416 pages used for memmap
Normal zone: 1306623 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 7, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x08] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 8, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 6 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbea52000-0xbec29fff]
PM: Registered nosave memory: [mem 0xbec2a000-0xbec33fff]
PM: Registered nosave memory: [mem 0xbec34000-0xbf021fff]
PM: Registered nosave memory: [mem 0xbf022000-0xbf15bfff]
PM: Registered nosave memory: [mem 0xbf15d000-0xbf362fff]
PM: Registered nosave memory: [mem 0xbf800000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
e820: [mem 0xbf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88023ec00000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - -
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2055931
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Memory: 8112260K/8354352K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 242092K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-5.
NR_IRQS:16640 nr_irqs:1272 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3515.946 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7031.89 BogoMIPS (lpj=14063784)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 00bf800000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28408 entries in 111 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-6300 Six-Core Processor (fam: 15, model: 02, stepping: 00)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5
x86: Booted up 1 node, 6 CPUs
smpboot: Total of 6 processors activated (42191.35 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbec34000-0xbf021fff] (4120576 bytes)
PM: Registering ACPI NVS region [mem 0xbf15d000-0xbf362fff] (2121728 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 18:26:54, date: 08/01/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:11.0: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:11.0: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:11.0: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:11.0: reg 0x20: [io 0xf050-0xf05f]
pci 0000:00:11.0: reg 0x24: [mem 0xfe30b000-0xfe30b3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfe30a000-0xfe30afff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfe309000-0xfe3090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfe308000-0xfe308fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfe307000-0xfe3070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0xf040-0xf047]
pci 0000:00:14.1: reg 0x14: [io 0xf030-0xf033]
pci 0000:00:14.1: reg 0x18: [io 0xf020-0xf027]
pci 0000:00:14.1: reg 0x1c: [io 0xf010-0xf013]
pci 0000:00:14.1: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfe300000-0xfe303fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfe306000-0xfe306fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
pci 0000:00:15.3: supports D1 D2
pci 0000:00:15.3: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfe305000-0xfe305fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfe304000-0xfe3040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [10de:0fc1] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:02:00.0: [1106:3483] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xfe200000-0xfe200fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:09.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xfe1c0000-0xfe1dffff]
pci 0000:05:00.0: reg 0x14: [mem 0xfe100000-0xfe17ffff]
pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f]
pci 0000:05:00.0: reg 0x1c: [mem 0xfe1e0000-0xfe1e3fff]
pci 0000:05:00.0: reg 0x30: [mem 0xfe180000-0xfe1bffff pref]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:15.3: PCI bridge to [bus 05]
pci 0000:00:15.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:15.3: bridge window [mem 0xfe100000-0xfe1fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 10 11 14 15) *0
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbea52000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf15d000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c51] has been reserved
system 00:01: [io 0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cd5] has been reserved
system 00:01: [io 0x0cd6-0x0cd7] has been reserved
system 00:01: [io 0x0cd8-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x089f] could not be reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [io 0x0900-0x090f] has been reserved
system 00:01: [io 0x0910-0x091f] has been reserved
system 00:01: [io 0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0220-0x0227] has been reserved
system 00:02: [io 0x0228-0x0237] has been reserved
system 00:02: [io 0x0a20-0x0a2f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 4]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:09.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci 0000:00:15.0: PCI bridge to [bus 04]
pci 0000:00:15.3: PCI bridge to [bus 05]
pci 0000:00:15.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:15.3: bridge window [mem 0xfe100000-0xfe1fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfe200000-0xfe2fffff]
pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xfe100000-0xfe1fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 27632K (ffff8800349f8000 - ffff8800364f4000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbaa52000-0xbea52000] (64MB) mapped at [ffff8800baa52000-ffff8800bea51fff]
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
microcode: CPU0: patch_level=0x06000822
microcode: CPU1: patch_level=0x06000822
microcode: CPU2: patch_level=0x06000822
microcode: CPU3: patch_level=0x06000822
microcode: CPU4: patch_level=0x06000822
microcode: CPU5: patch_level=0x06000822
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1406917614.904:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15898
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe309000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfe307000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfe304000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.0: irq 18, io mem 0xfe30a000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfe308000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:14.5: irq 18, io mem 0xfe306000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:16.0: irq 18, io mem 0xfe305000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb8: SerialNumber: 0000:02:00.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 1 port detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb9: SerialNumber: 0000:02:00.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 10:370:442
rtc_cmos 00:05: setting system clock to 2014-08-01 18:26:55 UTC (1406917615)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
systemd-udevd[133]: starting version 204
scsi0 : pata_atiixp
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
PTP clock support registered
scsi5 : ahci
ata3: SATA max UDMA/133 abar m1024@0xfe30b000 port 0xfe30b100 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfe30b000 port 0xfe30b180 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfe30b000 port 0xfe30b200 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfe30b000 port 0xfe30b280 irq 19
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:05:00.0: irq 73 for MSI/MSI-X
e1000e 0000:05:00.0: irq 74 for MSI/MSI-X
e1000e 0000:05:00.0: irq 75 for MSI/MSI-X
e1000e 0000:05:00.0 eth0: registered PHC clock
e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 68:05:ca:1e:df:87
e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: E46981-008
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: ATA-8: ST240HM000, C675, max UDMA/133
ata3.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST240HM000 C675 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 2:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata4.00: ATA-8: WDC WD5002AALX-00J37A0, 15.01H15, max UDMA/133
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: ATAPI: ASUS DRW-24B1ST a, 1.04, max UDMA/100
ata5.00: configured for UDMA/100
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA WDC WD5002AALX-0 15.0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sda: sda1
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] Attached SCSI disk
scsi 4:0:0:0: CD-ROM ASUS DRW-24B1ST a 1.04 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg2 type 5
sdb: sdb1 sdb2
sd 3:0:0:0: [sdb] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 3516.095 MHz
usb 4-2: new full-speed USB device number 2 using ohci-pci
usb 4-2: New USB device found, idVendor=045e, idProduct=0719
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-2: Product: Xbox 360 Wireless Receiver for Windows
usb 4-2: Manufacturer: \xffffffc2\xffffffa9\xffffffa9Microsoft
usb 4-2: SerialNumber: FFD3C980
usb 4-3: new full-speed USB device number 3 using ohci-pci
usb 4-3: New USB device found, idVendor=046d, idProduct=c52b
usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-3: Product: USB Receiver
usb 4-3: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Switched to clocksource tsc
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-3/input2
input: Logitech Unifying Device. Wireless PID:1024 as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.2/0003:046D:C52B.0003/input/input5
logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1024] on usb-0000:00:12.0-3:1
input: Logitech Unifying Device. Wireless PID:2011 as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.2/0003:046D:C52B.0003/input/input6
logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2011] on usb-0000:00:12.0-3:2
usb 4-4: new low-speed USB device number 4 using ohci-pci
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
usb 4-4: New USB device found, idVendor=1941, idProduct=8021
usb 4-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hid-generic 0003:1941:8021.0006: hiddev0,hidraw3: USB HID v1.00 Device [HID 1941:8021] on usb-0000:00:12.0-4/input0
usb 8-1: new high-speed USB device number 2 using xhci_hcd
usb 8-1: New USB device found, idVendor=2109, idProduct=3431
usb 8-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 8-1: Product: USB2.0 Hub
hub 8-1:1.0: USB hub found
hub 8-1:1.0: 4 ports detected
random: nonblocking pool is initialized
EXT4-fs (sda1): orphan cleanup on readonly fs
usb 8-1.4: new high-speed USB device number 3 using xhci_hcd
EXT4-fs (sda1): 25 orphan inodes deleted
EXT4-fs (sda1): recovery complete
usb 8-1.4: New USB device found, idVendor=18d1, idProduct=dddd
usb 8-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-1.4: Product: USB Mass Storage
usb 8-1.4: Manufacturer: Ingenic
usb 8-1.4: SerialNumber: INGENIC108A
usb-storage 8-1.4:1.0: USB Mass Storage device detected
scsi6 : usb-storage 8-1.4:1.0
usbcore: registered new interface driver usb-storage
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[446]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
MCE: In-kernel MCE decoding enabled.
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x42
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc90000c7eb00). heartbeat=60 sec (nowayout=0)
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
device-mapper: multipath: version 1.6.0 loaded
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
nvidia: module verification failed: signature and/or required key missing - tainting kernel
hda-intel 0000:00:14.2: Using LPIB position fix
hda-intel 0000:00:14.2: Enable sync_write for stable communication
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.38 Wed Jan 8 19:32:30 PST 2014
SKU: Nid=0x1d sku_cfg=0x4045e601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x000000e6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x1e
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4045e601 for NID 0x1d
realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0889
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Disabling 64bit DMA
hda-intel 0000:01:00.1: Enable delay in RIRB handling
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
scsi 6:0:0:0: Direct-Access 0000 PQ: 0 ANSI: 2
scsi 6:0:0:1: Direct-Access 0000 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:1: Attached scsi generic sg4 type 0
sd 6:0:0:1: [sdd] Attached SCSI removable disk
sd 6:0:0:0: [sdc] Attached SCSI removable disk
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (899) killed by TERM signal
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: cups main process (995) killed by HUP signal
init: cups main process ended, respawning
init: samba-ad-dc main process (928) terminated with status 1
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: udev-fallback-graphics main process (1071) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1602) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
nvidia 0000:01:00.0: irq 76 for MSI/MSI-X
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
vboxdrv: Found 6 processor cores.
vboxdrv: fAsync=0 offMin=0x4fd offMax=0x3cb7
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.12 (interface 0x001a0007).
vboxpci: IOMMU not found (not registered)
init: plymouth-stop pre-start process (2321) terminated with status 1
input: Xbox Gamepad (userspace driver) as /devices/virtual/input/input18
input: Xbox Gamepad (userspace driver) as /devices/virtual/input/input19
input: Xbox Gamepad (userspace driver) as /devices/virtual/input/input20
usb 8-1.4: USB disconnect, device number 3
usb 7-1: new full-speed USB device number 2 using ohci-pci
usb 7-1: New USB device found, idVendor=0a12, idProduct=0001
usb 7-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 7-1: Product: BT2.0
usbcore: registered new interface driver btusb
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
hid-generic 0005:003C:1124.0007: unknown main item tag 0x0
input: BlackBerry 9810 as /devices/pci0000:00/0000:00:16.0/usb7/7-1/7-1:1.0/bluetooth/hci0/hci0:41/input21
hid-generic 0005:003C:1124.0007: input,hidraw3: BLUETOOTH HID v1.00 Keyboard [BlackBerry 9810] on 00:15:83:07:cb:19
usb 8-1.3: new high-speed USB device number 4 using xhci_hcd
usb 8-1.3: New USB device found, idVendor=0fca, idProduct=8004
usb 8-1.3: New USB device strings: Mfr=1, Product=5, SerialNumber=3
usb 8-1.3: Product: RIM Composite Device
usb 8-1.3: Manufacturer: Research In Motion
usb 8-1.3: SerialNumber: A724AF71B29A10D965E3DAB91FFF42DB8019B3DF
usb-storage 8-1.3:1.1: USB Mass Storage device detected
scsi7 : usb-storage 8-1.3:1.1
scsi 7:0:0:0: Direct-Access RIM BlackBerry SD 0003 PQ: 0 ANSI: 4 CCS
scsi 7:0:0:1: Direct-Access RIM BlackBerry 1003 PQ: 0 ANSI: 4 CCS
sd 7:0:0:0: Attached scsi generic sg3 type 0
sd 7:0:0:1: Attached scsi generic sg4 type 0
sd 7:0:0:0: [sdc] Attached SCSI removable disk
sd 7:0:0:1: [sdd] Attached SCSI removable disk
usb 8-1.3: USB disconnect, device number 4
usb 8-1.3: new high-speed USB device number 5 using xhci_hcd
usb 8-1.3: New USB device found, idVendor=0fca, idProduct=8004
usb 8-1.3: New USB device strings: Mfr=1, Product=5, SerialNumber=3
usb 8-1.3: Product: RIM Composite Device
usb 8-1.3: Manufacturer: Research In Motion
usb 8-1.3: SerialNumber: A724AF71B29A10D965E3DAB91FFF42DB8019B3DF
usb-storage 8-1.3:1.1: USB Mass Storage device detected
scsi8 : usb-storage 8-1.3:1.1
scsi 8:0:0:0: Direct-Access RIM BlackBerry SD 0003 PQ: 0 ANSI: 4 CCS
scsi 8:0:0:1: Direct-Access RIM BlackBerry 1003 PQ: 0 ANSI: 4 CCS
sd 8:0:0:0: Attached scsi generic sg3 type 0
sd 8:0:0:1: Attached scsi generic sg4 type 0
sd 8:0:0:0: [sdc] Attached SCSI removable disk
sd 8:0:0:1: [sdd] Attached SCSI removable disk
sd 8:0:0:1: [sdd] 13209571 512-byte logical blocks: (6.76 GB/6.29 GiB)
------------[ cut here ]------------
WARNING: CPU: 2 PID: 0 at /build/buildd/linux-3.13.0/drivers/usb/host/xhci-ring.c:1589 handle_cmd_completion+0xde4/0xe40()
Modules linked in: hidp btusb pci_stub vboxpci(OF) vboxnetadp(OF) vboxnetflt(OF) vboxdrv(OF) bnep rfcomm bluetooth binfmt_misc snd_hda_codec_hdmi mxm_wmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep nvidia(POF) snd_pcm kvm_amd joydev snd_page_alloc kvm snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul snd_seq crc32_pclmul ghash_clmulni_intel aesni_intel dm_multipath aes_x86_64 lrw gf128mul scsi_dh glue_helper ablk_helper cryptd edac_core snd_seq_device serio_raw snd_timer k10temp fam15h_power sp5100_tco edac_mce_amd snd i2c_piix4 drm soundcore mac_hid wmi parport_pc ppdev lp parport usb_storage hid_generic dm_mirror dm_region_hash dm_log hid_logitech_dj usbhid hid pata_acpi e1000e psmouse ptp ahci pps_core pata_atiixp libahci
CPU: 2 PID: 0 Comm: swapper/2 Tainted: PF O 3.13.0-24-generic #47-Ubuntu
Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./990FXA-UD3, BIOS F2 07/15/2013
0000000000000009 ffff88023ec83da8 ffffffff81715ac4 0000000000000000
ffff88023ec83de0 ffffffff810676bd ffff8802332f8660 0000000000000000
ffff8802332f80a0 00000002332f80a0 ffff88022dfd0000 ffff88023ec83df0
Call Trace:
[] dump_stack+0x45/0x56
[] warn_slowpath_common+0x7d/0xa0
[] warn_slowpath_null+0x1a/0x20
[] handle_cmd_completion+0xde4/0xe40
[] xhci_irq+0x333/0xa60
[] ? sched_clock+0x9/0x10
[] xhci_msi_irq+0x11/0x20
[] handle_irq_event_percpu+0x3e/0x1d0
[] handle_irq_event+0x3d/0x60
[] handle_edge_irq+0x77/0x130
[] handle_irq+0x1e/0x30
[] do_IRQ+0x4d/0xc0
[] common_interrupt+0x6d/0x6d
[] ? cpuidle_enter_state+0x4f/0xc0
[] cpuidle_idle_call+0xb9/0x1f0
[] arch_cpu_idle+0xe/0x30
[] cpu_startup_entry+0xc5/0x290
[] start_secondary+0x218/0x2c0
---[ end trace 14f755ee58c3f009 ]---
xhci_hcd 0000:02:00.0: Reset device command completion for disabled slot 0
xhci_hcd 0000:02:00.0: Timeout while waiting for reset device command
usb 8-1.3: reset high-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022f950440
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022f950400
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022f9504c0
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022f950480
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022f950540
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022f950500
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022f9505c0
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022f950580
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880231c142c0
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880231c14280
xhci_hcd 0000:02:00.0: Trying to add endpoint 0x81 without dropping it.
usb 8-1.3: Busted HC? Not enough HCD resources for old configuration.
sd 8:0:0:1: Device offlined - not ready after error recovery
sd 8:0:0:1: [sdd] Incomplete mode parameter data
sd 8:0:0:1: [sdd] Assuming drive cache: write through
usb 8-1.3: USB disconnect, device number 5
scsi 8:0:0:0: rejecting I/O to offline device
scsi 8:0:0:0: killing request
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022f950440
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022f950400
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022f9504c0
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022f950480
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022f950540
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022f950500
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022f9505c0
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022f950580
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880231c142c0
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880231c14280
usb 8-1.3: new high-speed USB device number 6 using xhci_hcd
usb 8-1.3: New USB device found, idVendor=0fca, idProduct=8004
usb 8-1.3: New USB device strings: Mfr=1, Product=5, SerialNumber=3
usb 8-1.3: Product: RIM Composite Device
usb 8-1.3: Manufacturer: Research In Motion
usb 8-1.3: SerialNumber: A724AF71B29A10D965E3DAB91FFF42DB8019B3DF
usb-storage 8-1.3:1.1: USB Mass Storage device detected
scsi9 : usb-storage 8-1.3:1.1
scsi 9:0:0:0: Direct-Access RIM BlackBerry SD 0003 PQ: 0 ANSI: 4 CCS
scsi 9:0:0:1: Direct-Access RIM BlackBerry 1003 PQ: 0 ANSI: 4 CCS
sd 9:0:0:0: Attached scsi generic sg3 type 0
sd 9:0:0:1: Attached scsi generic sg4 type 0
sd 9:0:0:1: [sdd] Attached SCSI removable disk
sd 9:0:0:0: [sdc] Attached SCSI removable disk
sd 9:0:0:1: [sdd] 13209571 512-byte logical blocks: (6.76 GB/6.29 GiB)
init: smbd main process (889) killed by TERM signal
------------[ cut here ]------------
WARNING: CPU: 3 PID: 0 at /build/buildd/linux-3.13.0/drivers/usb/host/xhci-ring.c:1589 handle_cmd_completion+0xde4/0xe40()
Modules linked in: hidp btusb pci_stub vboxpci(OF) vboxnetadp(OF) vboxnetflt(OF) vboxdrv(OF) bnep rfcomm bluetooth binfmt_misc snd_hda_codec_hdmi mxm_wmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep nvidia(POF) snd_pcm kvm_amd joydev snd_page_alloc kvm snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul snd_seq crc32_pclmul ghash_clmulni_intel aesni_intel dm_multipath aes_x86_64 lrw gf128mul scsi_dh glue_helper ablk_helper cryptd edac_core snd_seq_device serio_raw snd_timer k10temp fam15h_power sp5100_tco edac_mce_amd snd i2c_piix4 drm soundcore mac_hid wmi parport_pc ppdev lp parport usb_storage hid_generic dm_mirror dm_region_hash dm_log hid_logitech_dj usbhid hid pata_acpi e1000e psmouse ptp ahci pps_core pata_atiixp libahci
CPU: 3 PID: 0 Comm: swapper/3 Tainted: PF W O 3.13.0-24-generic #47-Ubuntu
Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./990FXA-UD3, BIOS F2 07/15/2013
0000000000000009 ffff88023ecc3da8 ffffffff81715ac4 0000000000000000
ffff88023ecc3de0 ffffffff810676bd ffff8802332f84c0 0000000000000000
ffff8802332f8140 00000002332f8140 ffff88022dfd0000 ffff88023ecc3df0
Call Trace:
[] dump_stack+0x45/0x56
[] warn_slowpath_common+0x7d/0xa0
[] warn_slowpath_null+0x1a/0x20
[] handle_cmd_completion+0xde4/0xe40
[] xhci_irq+0x333/0xa60
[] ? sched_clock+0x9/0x10
[] xhci_msi_irq+0x11/0x20
[] handle_irq_event_percpu+0x3e/0x1d0
[] handle_irq_event+0x3d/0x60
[] handle_edge_irq+0x77/0x130
[] handle_irq+0x1e/0x30
[] do_IRQ+0x4d/0xc0
[] common_interrupt+0x6d/0x6d
[] ? cpuidle_enter_state+0x4f/0xc0
[] cpuidle_idle_call+0xb9/0x1f0
[] arch_cpu_idle+0xe/0x30
[] cpu_startup_entry+0xc5/0x290
[] start_secondary+0x218/0x2c0
---[ end trace 14f755ee58c3f00a ]---
xhci_hcd 0000:02:00.0: Reset device command completion for disabled slot 0
xhci_hcd 0000:02:00.0: Timeout while waiting for reset device command
usb 8-1.3: reset high-speed USB device number 6 using xhci_hcd
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022dbe1c40
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022dbe1c00
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022dbe1cc0
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022dbe1c80
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022dbe1d40
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022dbe1d00
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022dbe1dc0
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022dbe1d80
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b9884440
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b9884400
xhci_hcd 0000:02:00.0: Trying to add endpoint 0x81 without dropping it.
usb 8-1.3: Busted HC? Not enough HCD resources for old configuration.
sd 9:0:0:1: Device offlined - not ready after error recovery
sd 9:0:0:1: rejecting I/O to offline device
sd 9:0:0:1: [sdd] Asking for cache data failed
usb 8-1.3: USB disconnect, device number 6
sd 9:0:0:1: [sdd] Assuming drive cache: write through
scsi 9:0:0:0: rejecting I/O to offline device
scsi 9:0:0:0: killing request
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022dbe1c40
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022dbe1c00
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022dbe1cc0
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022dbe1c80
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022dbe1d40
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022dbe1d00
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022dbe1dc0
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022dbe1d80
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b9884440
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b9884400
usb 8-1.3: new high-speed USB device number 7 using xhci_hcd
usb 8-1.3: New USB device found, idVendor=0fca, idProduct=8004
usb 8-1.3: New USB device strings: Mfr=1, Product=5, SerialNumber=3
usb 8-1.3: Product: RIM Composite Device
usb 8-1.3: Manufacturer: Research In Motion
usb 8-1.3: SerialNumber: A724AF71B29A10D965E3DAB91FFF42DB8019B3DF
usb-storage 8-1.3:1.1: USB Mass Storage device detected
scsi10 : usb-storage 8-1.3:1.1
scsi 10:0:0:0: Direct-Access RIM BlackBerry SD 0003 PQ: 0 ANSI: 4 CCS
scsi 10:0:0:1: Direct-Access RIM BlackBerry 1003 PQ: 0 ANSI: 4 CCS
sd 10:0:0:0: Attached scsi generic sg3 type 0
sd 10:0:0:1: Attached scsi generic sg4 type 0
sd 10:0:0:0: [sdc] Attached SCSI removable disk
sd 10:0:0:1: [sdd] Attached SCSI removable disk
init: samba-ad-dc main process (10294) terminated with status 1
sd 10:0:0:1: [sdd] 13209571 512-byte logical blocks: (6.76 GB/6.29 GiB)
------------[ cut here ]------------
WARNING: CPU: 2 PID: 0 at /build/buildd/linux-3.13.0/drivers/usb/host/xhci-ring.c:1589 handle_cmd_completion+0xde4/0xe40()
Modules linked in: hidp btusb pci_stub vboxpci(OF) vboxnetadp(OF) vboxnetflt(OF) vboxdrv(OF) bnep rfcomm bluetooth binfmt_misc snd_hda_codec_hdmi mxm_wmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep nvidia(POF) snd_pcm kvm_amd joydev snd_page_alloc kvm snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul snd_seq crc32_pclmul ghash_clmulni_intel aesni_intel dm_multipath aes_x86_64 lrw gf128mul scsi_dh glue_helper ablk_helper cryptd edac_core snd_seq_device serio_raw snd_timer k10temp fam15h_power sp5100_tco edac_mce_amd snd i2c_piix4 drm soundcore mac_hid wmi parport_pc ppdev lp parport usb_storage hid_generic dm_mirror dm_region_hash dm_log hid_logitech_dj usbhid hid pata_acpi e1000e psmouse ptp ahci pps_core pata_atiixp libahci
CPU: 2 PID: 0 Comm: swapper/2 Tainted: PF W O 3.13.0-24-generic #47-Ubuntu
Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./990FXA-UD3, BIOS F2 07/15/2013
0000000000000009 ffff88023ec83da8 ffffffff81715ac4 0000000000000000
ffff88023ec83de0 ffffffff810676bd ffff8802332f8720 0000000000000000
ffff8802332f81e0 00000002332f81e0 ffff88022dfd0000 ffff88023ec83df0
Call Trace:
[] dump_stack+0x45/0x56
[] warn_slowpath_common+0x7d/0xa0
[] warn_slowpath_null+0x1a/0x20
[] handle_cmd_completion+0xde4/0xe40
[] xhci_irq+0x333/0xa60
[] ? sched_clock+0x9/0x10
[] xhci_msi_irq+0x11/0x20
[] handle_irq_event_percpu+0x3e/0x1d0
[] handle_irq_event+0x3d/0x60
[] handle_edge_irq+0x77/0x130
[] handle_irq+0x1e/0x30
[] do_IRQ+0x4d/0xc0
[] common_interrupt+0x6d/0x6d
[] ? cpuidle_enter_state+0x4f/0xc0
[] cpuidle_idle_call+0xb9/0x1f0
[] arch_cpu_idle+0xe/0x30
[] cpu_startup_entry+0xc5/0x290
[] start_secondary+0x218/0x2c0
---[ end trace 14f755ee58c3f00b ]---
xhci_hcd 0000:02:00.0: Reset device command completion for disabled slot 0
xhci_hcd 0000:02:00.0: Timeout while waiting for reset device command
usb 8-1.3: reset high-speed USB device number 7 using xhci_hcd
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003524c040
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003524c000
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003524c0c0
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003524c080
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003524c140
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003524c100
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003524c1c0
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003524c180
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022fcd97c0
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022fcd9780
xhci_hcd 0000:02:00.0: Trying to add endpoint 0x81 without dropping it.
usb 8-1.3: Busted HC? Not enough HCD resources for old configuration.
sd 10:0:0:1: Device offlined - not ready after error recovery
sd 10:0:0:1: rejecting I/O to offline device
sd 10:0:0:1: [sdd] Asking for cache data failed
sd 10:0:0:1: [sdd] Assuming drive cache: write through
usb 8-1.3: USB disconnect, device number 7
scsi 10:0:0:0: rejecting I/O to offline device
scsi 10:0:0:0: killing request
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003524c040
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003524c000
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003524c0c0
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003524c080
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003524c140
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003524c100
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003524c1c0
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88003524c180
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022fcd97c0
xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022fcd9780
usb 8-1.3: new high-speed USB device number 8 using xhci_hcd
usb 8-1.3: New USB device found, idVendor=0fca, idProduct=8004
usb 8-1.3: New USB device strings: Mfr=1, Product=5, SerialNumber=3
usb 8-1.3: Product: RIM Composite Device
usb 8-1.3: Manufacturer: Research In Motion
usb 8-1.3: SerialNumber: A724AF71B29A10D965E3DAB91FFF42DB8019B3DF
usb-storage 8-1.3:1.1: USB Mass Storage device detected
scsi11 : usb-storage 8-1.3:1.1
scsi 11:0:0:0: Direct-Access RIM BlackBerry SD 0003 PQ: 0 ANSI: 4 CCS
scsi 11:0:0:1: Direct-Access RIM BlackBerry 1003 PQ: 0 ANSI: 4 CCS
sd 11:0:0:0: Attached scsi generic sg3 type 0
sd 11:0:0:1: Attached scsi generic sg4 type 0
sd 11:0:0:1: [sdd] Attached SCSI removable disk
sd 11:0:0:0: [sdc] Attached SCSI removable disk
usb 7-1: USB disconnect, device number 2
usb 8-1.3: USB disconnect, device number 8
input: Xbox Gamepad (userspace driver) as /devices/virtual/input/input22
input: Xbox Gamepad (userspace driver) as /devices/virtual/input/input23
input: Xbox Gamepad (userspace driver) as /devices/virtual/input/input24
input: Xbox Gamepad (userspace driver) as /devices/virtual/input/input25
input: Xbox Gamepad (userspace driver) as /devices/virtual/input/input26
init: upstart-udev-bridge main process (442) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-socket-bridge main process (832) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-file-bridge main process (1029) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-udev-bridge main process (21560) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-file-bridge main process (21563) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-socket-bridge main process (21566) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
input: Xbox Gamepad (userspace driver) as /devices/virtual/input/input27
input: Xbox Gamepad (userspace driver) as /devices/virtual/input/input28
systemd-hostnamed[21516]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[23005]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[24168]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[3570]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
input: Xbox Gamepad (userspace driver) as /devices/virtual/input/input29
input: Xbox Gamepad (userspace driver) as /devices/virtual/input/input30
systemd-hostnamed[7707]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[12402]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 3-1: new high-speed USB device number 4 using ehci-pci
usb 3-1: New USB device found, idVendor=0bc2, idProduct=a003
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: Backup+ BK
usb 3-1: Manufacturer: Seagate
usb 3-1: SerialNumber: NA5CNJ9N
usb-storage 3-1:1.0: USB Mass Storage device detected
scsi12 : usb-storage 3-1:1.0
scsi 12:0:0:0: Direct-Access Seagate Backup+ BK 0836 PQ: 0 ANSI: 6
sd 12:0:0:0: Attached scsi generic sg3 type 0
sd 12:0:0:0: [sdc] Spinning up disk...
.ready
sd 12:0:0:0: [sdc] 1953525167 512-byte logical blocks: (1.00 TB/931 GiB)
sd 12:0:0:0: [sdc] Write Protect is off
sd 12:0:0:0: [sdc] Mode Sense: 2b 00 10 08
sd 12:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
sdc: sdc1
sd 12:0:0:0: [sdc] Attached SCSI disk
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
usb 3-1: USB disconnect, device number 4
sd 12:0:0:0: [sdc] Synchronizing SCSI cache
sd 12:0:0:0: [sdc]
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
i2c /dev entries driver
waiting module removal not supported: please upgrade
waiting module removal not supported: please upgrade[583786.496509] it87: Found IT8728F chip at 0x228, revision 1
it87: Beeping is supported
systemd-hostnamed[9515]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[12152]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 7-1: new full-speed USB device number 3 using ohci-pci
usb 7-1: New USB device found, idVendor=04b4, idProduct=5201
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-1: Product: Combi keyboard Hub ref design V1.68
usb 7-1: Manufacturer: Cypress Semiconductor
hub 7-1:1.0: USB hub found
hub 7-1:1.0: 3 ports detected
usb 7-1.3: new full-speed USB device number 4 using ohci-pci
usb 7-1.3: New USB device found, idVendor=060b, idProduct=2001
usb 7-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 060b:2001 as /devices/pci0000:00/0000:00:16.0/usb7/7-1/7-1.3/7-1.3:1.0/input/input31
hid-generic 0003:060B:2001.0008: input,hidraw3: USB HID v1.10 Keyboard [HID 060b:2001] on usb-0000:00:16.0-1.3/input0
input: HID 060b:2001 as /devices/pci0000:00/0000:00:16.0/usb7/7-1/7-1.3/7-1.3:1.1/input/input32
hid-generic 0003:060B:2001.0009: input,hidraw4: USB HID v1.10 Device [HID 060b:2001] on usb-0000:00:16.0-1.3/input1
usb 7-1.1: new full-speed USB device number 5 using ohci-pci
usb 7-1.1: not running at top speed; connect to a high speed hub
usb 7-1.1: New USB device found, idVendor=125f, idProduct=c08a
usb 7-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-1.1: Product: ADATA USB Flash Drive
usb 7-1.1: Manufacturer: ADATA
usb 7-1.1: SerialNumber: 1190907182190010
usb 7-1.1: rejected 1 configuration due to insufficient available bus power
usb 7-1.1: no configuration chosen from 1 choice
usb 7-1.1: USB disconnect, device number 5
usb 7-1.2: new full-speed USB device number 6 using ohci-pci
usb 7-1.2: not running at top speed; connect to a high speed hub
usb 7-1.2: New USB device found, idVendor=0930, idProduct=6545
usb 7-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-1.2: Product: DT 101 G2
usb 7-1.2: Manufacturer: Kingston
usb 7-1.2: SerialNumber: 001CC0C61232EBC1442502FB
usb 7-1.2: rejected 1 configuration due to insufficient available bus power
usb 7-1.2: no configuration chosen from 1 choice
usb 7-1: USB disconnect, device number 3
usb 7-1.2: USB disconnect, device number 6
usb 7-1.3: USB disconnect, device number 4
usb 8-1.4: new full-speed USB device number 9 using xhci_hcd
usb 8-1.4: New USB device found, idVendor=04b4, idProduct=5201
usb 8-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-1.4: Product: Combi keyboard Hub ref design V1.68
usb 8-1.4: Manufacturer: Cypress Semiconductor
usb 8-1.4: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 8-1.4:1.0: USB hub found
hub 8-1.4:1.0: 3 ports detected
usb 8-1.4.2: new full-speed USB device number 10 using xhci_hcd
usb 8-1.4.2: not running at top speed; connect to a high speed hub
usb 8-1.4.2: New USB device found, idVendor=0930, idProduct=6545
usb 8-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-1.4.2: Product: DT 101 G2
usb 8-1.4.2: Manufacturer: Kingston
usb 8-1.4.2: SerialNumber: 001CC0C61232EBC1442502FB
usb 8-1.4.2: rejected 1 configuration due to insufficient available bus power
usb 8-1.4.2: no configuration chosen from 1 choice
usb 8-1.4.3: new full-speed USB device number 11 using xhci_hcd
usb 8-1.4.3: New USB device found, idVendor=060b, idProduct=2001
usb 8-1.4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 8-1.4.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: HID 060b:2001 as /devices/pci0000:00/0000:00:09.0/0000:02:00.0/usb8/8-1/8-1.4/8-1.4.3/8-1.4.3:1.0/input/input33
hid-generic 0003:060B:2001.000A: input,hidraw3: USB HID v1.10 Keyboard [HID 060b:2001] on usb-0000:02:00.0-1.4.3/input0
input: HID 060b:2001 as /devices/pci0000:00/0000:00:09.0/0000:02:00.0/usb8/8-1/8-1.4/8-1.4.3/8-1.4.3:1.1/input/input34
hid-generic 0003:060B:2001.000B: input,hidraw4: USB HID v1.10 Device [HID 060b:2001] on usb-0000:02:00.0-1.4.3/input1
usb 8-1.4.2: USB disconnect, device number 10
usb 3-1: new high-speed USB device number 6 using ehci-pci
usb 3-1: New USB device found, idVendor=0930, idProduct=6545
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: DT 101 G2
usb 3-1: Manufacturer: Kingston
usb 3-1: SerialNumber: 001CC0C61232EBC1442502FB
usb-storage 3-1:1.0: USB Mass Storage device detected
scsi13 : usb-storage 3-1:1.0
scsi 13:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 0 CCS
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdc] 30481152 512-byte logical blocks: (15.6 GB/14.5 GiB)
sd 13:0:0:0: [sdc] Write Protect is off
sd 13:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 13:0:0:0: [sdc] No Caching mode page found
sd 13:0:0:0: [sdc] Assuming drive cache: write through
sd 13:0:0:0: [sdc] No Caching mode page found
sd 13:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1 sdc2
sd 13:0:0:0: [sdc] No Caching mode page found
sd 13:0:0:0: [sdc] Assuming drive cache: write through
sd 13:0:0:0: [sdc] Attached SCSI removable disk
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
sdc: detected capacity change from 15606349824 to 0
usb 3-1: USB disconnect, device number 6
usb 8-1.4: USB disconnect, device number 9
usb 8-1.4.3: USB disconnect, device number 11
usb 7-1: new full-speed USB device number 7 using ohci-pci
usb 7-1: New USB device found, idVendor=04b4, idProduct=5201
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-1: Product: Combi keyboard Hub ref design V1.68
usb 7-1: Manufacturer: Cypress Semiconductor
hub 7-1:1.0: USB hub found
hub 7-1:1.0: 3 ports detected
usb 7-1.3: new full-speed USB device number 8 using ohci-pci
usb 7-1.3: New USB device found, idVendor=060b, idProduct=2001
usb 7-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 060b:2001 as /devices/pci0000:00/0000:00:16.0/usb7/7-1/7-1.3/7-1.3:1.0/input/input35
hid-generic 0003:060B:2001.000C: input,hidraw3: USB HID v1.10 Keyboard [HID 060b:2001] on usb-0000:00:16.0-1.3/input0
input: HID 060b:2001 as /devices/pci0000:00/0000:00:16.0/usb7/7-1/7-1.3/7-1.3:1.1/input/input36
hid-generic 0003:060B:2001.000D: input,hidraw4: USB HID v1.10 Device [HID 060b:2001] on usb-0000:00:16.0-1.3/input1
usb 7-1: USB disconnect, device number 7
usb 7-1.3: USB disconnect, device number 8
usb 7-1: new full-speed USB device number 9 using ohci-pci
usb 7-1: New USB device found, idVendor=04b4, idProduct=5201
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-1: Product: Combi keyboard Hub ref design V1.68
usb 7-1: Manufacturer: Cypress Semiconductor
hub 7-1:1.0: USB hub found
hub 7-1:1.0: 3 ports detected
usb 7-1.3: new full-speed USB device number 10 using ohci-pci
usb 7-1.3: New USB device found, idVendor=060b, idProduct=2001
usb 7-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 060b:2001 as /devices/pci0000:00/0000:00:16.0/usb7/7-1/7-1.3/7-1.3:1.0/input/input37
hid-generic 0003:060B:2001.000E: input,hidraw3: USB HID v1.10 Keyboard [HID 060b:2001] on usb-0000:00:16.0-1.3/input0
input: HID 060b:2001 as /devices/pci0000:00/0000:00:16.0/usb7/7-1/7-1.3/7-1.3:1.1/input/input38
hid-generic 0003:060B:2001.000F: input,hidraw4: USB HID v1.10 Device [HID 060b:2001] on usb-0000:00:16.0-1.3/input1
usb 7-1.1: new low-speed USB device number 11 using ohci-pci
usb 7-1.1: New USB device found, idVendor=045e, idProduct=00f6
usb 7-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-1.1: Product: Comfort Optical Mouse 1000
usb 7-1.1: Manufacturer: Microsoft
input: Microsoft Comfort Optical Mouse 1000 as /devices/pci0000:00/0000:00:16.0/usb7/7-1/7-1.1/7-1.1:1.0/input/input39
hid-generic 0003:045E:00F6.0010: input,hidraw5: USB HID v1.11 Mouse [Microsoft Comfort Optical Mouse 1000] on usb-0000:00:16.0-1.1/input0
usb 7-1.1: USB disconnect, device number 11
usb 7-1: USB disconnect, device number 9
usb 7-1.3: USB disconnect, device number 10
warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
vboxdrv: Found 6 processor cores.
vboxdrv: fAsync=0 offMin=0x5bd offMax=0x17016
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.14 (interface 0x001a0007).
vboxpci: IOMMU not found (not registered)
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
vboxnetflt: 2989 out of 5419 packets were not sent (directed to host)
systemd-hostnamed[23755]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
Chrome_ChildThr[24632]: segfault at 0 ip 00007f2bc8f51415 sp 00007f2bc006e410 error 6 in libmozalloc.so[7f2bc8f50000+2000]
usb 3-1: new high-speed USB device number 9 using ehci-pci
usb 3-1: New USB device found, idVendor=0bc2, idProduct=a003
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: Backup+ BK
usb 3-1: Manufacturer: Seagate
usb 3-1: SerialNumber: NA5CNJ9N
usb-storage 3-1:1.0: USB Mass Storage device detected
scsi14 : usb-storage 3-1:1.0
scsi 14:0:0:0: Direct-Access Seagate Backup+ BK 0836 PQ: 0 ANSI: 6
sd 14:0:0:0: Attached scsi generic sg3 type 0
sd 14:0:0:0: [sdc] Spinning up disk...
.ready
sd 14:0:0:0: [sdc] 1953525167 512-byte logical blocks: (1.00 TB/931 GiB)
sd 14:0:0:0: [sdc] Write Protect is off
sd 14:0:0:0: [sdc] Mode Sense: 2b 00 10 08
sd 14:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
sdc: sdc1
sd 14:0:0:0: [sdc] Attached SCSI disk
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
usb 3-1: USB disconnect, device number 9
sd 14:0:0:0: [sdc] Synchronizing SCSI cache
sd 14:0:0:0: [sdc]
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
cryptkeeper[29466]: segfault at 7fda00000125 ip 00007fdaf396b935 sp 00007fff6d6e6ca0 error 4 in libgtk-x11-2.0.so.0.2400.23[7fdaf38e8000+42f000]
traps: cryptkeeper[29472] general protection ip:7f8bc97db92d sp:7fffa4fef590 error:0 in libgtk-x11-2.0.so.0.2400.23[7f8bc9758000+42f000]
traps: cryptkeeper[29479] general protection ip:7f612c17b935 sp:7fffc7492b20 error:0 in libgtk-x11-2.0.so.0.2400.23[7f612c0f8000+42f000]
usb 8-1.4: new full-speed USB device number 12 using xhci_hcd
usb 8-1.4: New USB device found, idVendor=1390, idProduct=0001
usb 8-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-1.4: Product: ONE XXL IQ Rts
usb 8-1.4: Manufacturer: TomTom
usb 8-1.4: SerialNumber: GU2043B01786
usb-storage 8-1.4:1.0: USB Mass Storage device detected
scsi15 : usb-storage 8-1.4:1.0
scsi 15:0:0:0: Direct-Access TomTom ONE XXL IQ Rts U204 PQ: 0 ANSI: 2
sd 15:0:0:0: Attached scsi generic sg3 type 0
sd 15:0:0:0: [sdc] 3907584 512-byte logical blocks: (2.00 GB/1.86 GiB)
sd 15:0:0:0: [sdc] Write Protect is off
sd 15:0:0:0: [sdc] Mode Sense: 03 00 00 00
sd 15:0:0:0: [sdc] No Caching mode page found
sd 15:0:0:0: [sdc] Assuming drive cache: write through
sd 15:0:0:0: [sdc] No Caching mode page found
sd 15:0:0:0: [sdc] Assuming drive cache: write through
sdc:
sd 15:0:0:0: [sdc] No Caching mode page found
sd 15:0:0:0: [sdc] Assuming drive cache: write through
sd 15:0:0:0: [sdc] Attached SCSI removable disk
FAT-fs (sdc): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 8-1.4: USB disconnect, device number 12
Adding 1260512k swap on 1. Priority:-1 extents:9 across:1899488k SSFS
conftest[8608]: segfault at 0 ip 00000000004005c0 sp 00007fffa77e5430 error 4 in conftest[400000+1000]
conftest[8636]: segfault at 0 ip 00007fa3c21a9126 sp 00007ffff3a73a08 error 4 in libc-2.19.so[7fa3c2068000+1bc000]
systemd-hostnamed[19648]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!